Better Aim

Injection Video Guide

System Requirements: [+] Windows 10 & 11 (Supports 24h2) [+] CPU: Intel & AMD [+] GPU: Nvidia & AMD [+] UEFI Bootmode

Requirements

Kindly ensure that all requirements have been thoroughly reviewed before proceeding. For ticket processing, we will need verification of each setting prior to moving forward.

1. Please download the support.exe, run the application, and use the password "cam” when prompted. (Troubleshooter File) ← link attached for the troubleshooter aka support file.

   
2. Once you reach this window, enter the number "9" and proceed. This will setup your PC to use the Delta Aimbot.

   
3. Once the support.exe has run through all 9 steps, make sure that Defender Control has successfully disabled Windows Defender (It should look like the image below). Side note: Sometimes in between Step 2 & Step 3, your PC may encounter some slowness when opening certain .exe files. Just run Defender Control again and RE-ENABLE & then DISABLE Windows Defender again. We have troubleshooted the issue and found that Windows Defender may sometimes be stuck while scanning some of your PC files.

   
4. Next, open the Nvidia Control Panel and search for the specified setting.

   
5. Enable the following : I. Full-screen scaling

II. Override the scaling mode set by games and programs

These settings have proven to be the most effective based on the majority of successful configurations. (The settings may vary depending on individual user configurations. Please test them at your convenience.)

1. *IMPORTANT* Ensure that both Secure Boot and Fast Boot are disabled in the BIOS settings. (Some users may encounter difficulties with the cheat not loading, as this can vary depending on individual system configurations.) Here is a link to a video that provides step-by-step instructions on how to disable Secure Boot / Fast Boot: How to disable secure boot ←(Video tutorial on how to disable Secure Boot) How to disable fast boot (Video tutorial on how to disable Fast Boot in windows) ^ For the Fast Boot settings in BIOS, it can also be turned off.

   

   
2. If you are experiencing issues with the aim not working, make sure that Exploit Protection is turned off. (Some users may experience issues with the cheat not loading, as this can vary depending on individual system configurations.) (Some users have this option enabled by default, while others have it disabled. If you're experiencing issues with the aimbot, try adjusting the settings to see if it improves the injection process.)

   
3. Monitor count (single/double/triple): Some users find that the cheat works only with a single monitor. If you're experiencing issues, try unplugging additional monitors and using just one. Alternatively, you can test a different HDMI or DisplayPort connection to see if that resolves the issue. (you have to restart your pc to take effect) Windows Scaling has to be set to 100% (varies between users)

4. Aspect Ratio / Fullscreen / Borderless / Windowed / Resolution (auto by default, some players have trouble locking/snapping onto enemy operators, mess around with the Aspect Ratio / Fullscreen / Borderless / Windowed / Resolution to your liking if it doesn't work. Keep in mind that these settings can vary between users, as the support team has observed that different results based on helping different users on either of these options)

   
6. Change Toggle → Hold in keyboard and mouse settings in game.Many users have reported issues with the aim not locking when right-clicking. This is often because the keybinds are set to "TOGGLE" instead of "HOLD" Make sure to adjust your keybinds to "hold" for proper functionalit

1. Once all the requirements have been met, follow these steps to inject the cheat: (It generally shouldn't matter whether the files are placed on an internal or external drive [such as a USB or external hard drive]. However, some users have reported difficulties with injection when the files are located on an external drive. If you're experiencing issues, try moving the files to an internal drive to see if that resolves the problem.)

2. Run the loader that the admins gave you the key to (Id_protected / Hawk / Pineapple) as the administrator.

1. Enter your license key. (To renew your key, simply delete the activation_key file and then run the loader again.)

2. Press enter to save the license key on your disk.

3. You will now see this menu.

1. Launch Delta Force and enter the lobby area

2. Go back to the ‘Selected’ loader (id_protected/hawk/pineapple) and select ‘Delta Force’ & press Enter

3. You should hear 3 beeps to indicate that injection is successful

4. Go to the firing range to test out the aimbot.

5. Right click to activate the aimbot on the test range dummy with any gun or knife

If it doesn’t work, please open a support ticket. Our staff will be happy to assist you. However, please be mindful of time zone differences, as not all staff members may be available during certain hours, especially when some of us are offline or sleeping.

Delta Force has no menu. If the injection is successful, you will hear three (3) beeps as confirmation.

Aimbot Button Configs

F1 - Enable Aimbot and FOV (Doesn't Render)

F2 - Reduce Aimbot and FOV (Doesn't Render)

F3 - Reduce smoothing

F4 - Increase smoothing Change Aim Bone/Body Part

F6 - Head

F7 - Neck

F8 - Chest

F9 - Torso

F10 - Legs Thank you for your time, and I sincerely hope this guide resolves as many issues as possible. I will continue to take note of any new fixes and update the guide accordingly to ensure it remains helpful.