Fuser Overview

Fuser Overview

Indicator Lights:

• [D1]: Power indicator (solid light when powered on)

• [D2]: Fusion function indicator (solid light when fusion is on, off when fusion is off)

• [H2]: HDMI secondary input signal indicator (solid light when functioning normally)

• [H1]: HDMI primary input signal indicator (solid light when functioning normally)

---

Button Functions:

• Power: Power switch

• [K1]: Short press: Rotate to switch between resolutions—1920x1080, 2560x1440, 3840x2160, 2560x1080, 3440x1440 (factory default is 1920x1080).

• [K1]: Long press (hold for 3 seconds): The top-left corner of the screen will display the current resolution and refresh rate. The top shows main unit information, while the bottom shows secondary unit information.

• [K2]: Short press: Rotate to adjust upper keying intensity (0-20 levels, with a total of 21 settings; factory default is 0, where 0 still applies keying).

• [K3]: Short press: Restore upper keying intensity to the factory default of 0.

• [K4]: Short press: Toggle the fusion function on/off. Long press: Switch between HDMI 1/2 or combined output.

---

Port Guide:

• HDMI: Connect to the primary display.

• HDMI1: Connect to the GPU of your main PC.

• HDMI2: Connect to the GPU of your secondary PC.

• Type-C: Used for updates and EDID injection.

• DC 12V: Power input.