🟢Blurred COD DMA
✅ Initial Setup (Cheat PC)
Install C++ Redistributables ➤ Download and install from: Microsoft C++ Redists
Install WebView2 ➤ Usually pre-installed on Windows 10/11. If needed: WebView2 Download
Install DMA Driver ➤ Run the driver installer as Administrator ➤ Download driver here ➤ Restart your cheat PC after installation.
Connect the DMA Card ➤ Plug the cable into a USB 3.0+ port on your cheat PC ➤ Ensure the DMA card is connected via the correct data port
Launch Blurred ➤ If you get “Failed to initialize DMA”, restart both PCs. ➤ Still having issues? Refer to the Troubleshooting section below.
Generate MMAP
Creating an MMap file can fix many issues like slow/stuck progress or searching speeds, DMA connectivity issues, some players or items not showing up on ESP/Aimbot, etc
🧰 Step 1: Use RamMap on Your Gaming PC
Download & Extract RamMap ➤ Visit the official site and download RamMap ➤ Use incognito mode or clear browser history after downloading
Run RamMap64.exe as Administrator ➤ Make sure you're running it on your main (gaming) PC, not your cheat PC
Save the Memory Snapshot ➤ In RamMap, go to the top-left menu → File → Save ➤ Save the .RMP file somewhere easy to access (like your desktop)
📤 Step 2: Transfer & Convert the File
Upload the .RMP file to the MMap Tool Website ➤ The tool runs locally and doesn't upload your file online ➤ It’s safe and contains no personal info
Click “Copy” or “Download” ➤ Transfer the MMap result to your cheat PC (via USB, Discord, etc.)
📂 Step 3: Set Up the MMap File for Blurred
Create a Folder for Blurred (Cheat PC) ➤ If you haven’t already, make a folder on your desktop for the Blurred loader
Add the MMap File ➤ Create a new text file in that folder and name it exactly: mmap.txt (all lowercase) ➤ Paste the MMap contents from the tool into this file
▶️ Final Step: Launch Blurred
Open Blurred ➤ If everything is correct, the CMD will show "Loading MMap..." ➤ If not, double-check the file name and that it’s in the correct folder
Your MMap setup is now complete.
Troubleshooting:
Failed to connect to memory acquisition device:
➤ Shut down both PCs completely ➤ Unplug/replug the DMA card and USB cable ➤ Power both PCs back on
Unable to locate valid DTB #x:
➤ Create the MMap file properly ➤ Disable virtualization in BIOS: Intel: Disable VT-x / VT-d AMD: Disable SVM / IOMMU ➤ Try a full restart of both PCs ➤ If issue started after flashing firmware, contact your firmware supplier
Failed to find base address:
➤ Restart both PCs ➤ Double-check your MMap file ➤ On both PCs, open Command Prompt as Admin and run: sfc /scannow DISM /Online /Cleanup-Image /RestoreHealth ➤ Restart after both commands complete
Other USB Devices disconnnecting/reconnecting:
If you get this issue where a peripheral (headset, mouse, keyboard etc) are cutting in and out on your main gaming PC;
➤ Try different PCIe slots for the DMA card ➤ Move affected USB devices to other USB ports on the motherboard
KMBOX B+ Set Up:
🔌 Hardware Setup -
Connect the Cables ➤ Plug a cable from the top-left port of the KMBox into your cheat PC ➤ Plug another cable from the bottom-left port into your gaming PC
Install the KMBox Driver (on the Radar/cheat PC) ➤ If not already installed, download and install the KMBox driver ➤ Restart your cheat PC after installation
🖥 Software & Verification -
Launch Blurred ➤ Look in the command window (CMD) ➤ If you see: "Successfully connected to your KMBox B+" → You're good to go ➤ If not: ➤ Recheck cable connections ➤ Restart both PCs ➤ Still not working? Open ticket on Discord for support
Test KMBOX Functionality ➤ Go to the "Debug" tab in Blurred ➤ Click "Test KMBox Move" and "Test KMBox Click" ➤ If nothing happens on your gaming PC: ➤ Fully unplug/replug the KMBox ➤ Click "Restart KMBox" in Blurred ➤ Still not working? Open a ticket on Discord ➤ If the tests do work, your KMBox is fully set up and ready to use
KMBOX NET Set Up:
🔌 Hardware Setup
Connect the KMBox Net ➤ Plug the top-left port of the KMBox Net into your cheat PC ➤ Plug the bottom-left port into your gaming PC
🖥 Driver Installation (Cheat PC)
Download & Extract Driver ➤ Download the KMBox Net driver and extract the folder
Install the Driver ➤ Open WCHUSBNIC.EXE from the extracted folder ➤ Click the big “INSTALL” button ➤ If installation fails, contact support on Discord
Restart your Cheat PC
🌐 Network Setup (Cheat PC)
Go to: Control Panel → Network and Internet → Network and Sharing Center → Change adapter settings
Find the KMBox Net Network Adapter
➤ Right-click → Properties ➤ If unsure which adapter it is, unplug/replug the KMBox and watch which one appears/disappears
Network Settings ➤ Disable: Internet Protocol Version 6 (TCP/IPv6) ➤ Enable & Configure: Internet Protocol Version 4 (TCP/IPv4)
➤ Click Properties and set it the following:
🧪 Blurred Setup & Testing
Launch Blurred ➤ Go to the “Debug” tab ➤ Enter the IP and Port shown on your KMBox Net screen ➤ Click “Connect”
Test the connection ➤ Use “Test KMBox Move” and “Test KMBox Click” ➤ If your mouse doesn’t move/click on the gaming PC: ➤ Restart both PCs and try again
Your KMBox Net is now ready to use. If you need assistance at any step, our support team is available via Discord.
Last updated