🟢Revo EFT

REVO Software Setup Guide

1. Prepare Your DMA System

• Disable Virtualization Features (if not needed):

  • For AMD CPUs: Disable SVM (Secure Virtual Machine) and IOMMU in the BIOS.

  • For Intel CPUs: Disable VT-d and Intel Volume Manager in the BIOS.

• Disable Quick Start & Safe Start in BIOS.

• Disable NX-Bit / XD-bit (if available) in CPU settings.

• Enable CSM (Compatibility Support Module) in BIOS if needed.

• Set PCI Slot to Gen1 (Advanced > PCI Settings) for better compatibility.

---

2. Install Required Software

• Visual C++ Redistributable Runtimes:

  • Download and install the all-in-one package from here.

  • This ensures all necessary runtime libraries are installed.

• Windows Defender Control:

  • Download DControl from here.

  • Run the tool to disable Windows Defender.

---

3. Adjust Graphics Settings for Escape from Tarkov

• Locate the Graphics.ini File:

  • Navigate to C:\Users\UserName\AppData\Roaming\Battlestate Games\Escape from Tarkov\Settings\Graphics.ini.

  • Adjust the resolution settings to match your monitor's native resolution to avoid issues with ESP or other visual elements.

  • Save the file after making changes.

---

4. Windows Settings

• Disable Core Isolation:

  • Go to Windows Security > Device Security > Core Isolation.

  • Turn off Memory Integrity.

• Power Settings:

  • Set your power plan to High Performance in Control Panel > Power Options.

---

5. DMA Memory Mapper (MMAP)

• Download REVO DMA Memory Mapper:

  • Download the tool from here.
  • Run the tool to map memory for DMA-related operations.

---

6. Test DMA Card Speed

• Download REVO DMA Test Tool:

  • Download the tool from here.
  • Run the tool with Option 3 to test the speed of your DMA card.

  • Ensure that the throughput and read/write speeds are optimal.

  • If speeds are lower than expected, check your hardware connections and BIOS settings.

  • Confirm you are using a quality high speed cable.