Flashing Firmware Guide

Make sure Gaming PC/DMA card are on and Connected to 2nd PC

DMA Driver Set Up

Step 1: On 2nd PC push windows button and search for "Device Manager"

Step 2: Locate the "Other Devices" Tab

Step 3: Right Click on "FTDI SuperSpeed-FIFO Bridge" or similar name.

Step 4: Click Update Driver Step 5: Click "Click Browse my computer for drivers"

Step 6: Locate where you put the file "FTD3XXDriver_XXXXX" Step 7: Choose the right driver for your computer

Step 8: Follow Steps on Driver updater & wait for driver install conformation

Step 9: Verify in Device Manager under "Universal Seriel Bus Controllers" that the device has updated.

Step 10: Download and Run the DMA Benchmark tool to confirm it is reading Step 11: Enjoy

Flashing the FW

1) Change DMA USB C into JTAG (Closest to Motherboard)

2) Open ZADIG.exe

3) Click Options > List All Devices

4) Click on RS interface 0 or Similar

5) Replace or install driver

6) Now go into OCD Folder and place ur FW in there

7) Rename the fw to pcileech_screamer_top.bin

8) Start flash.bat this can take up to 5 min after its finished press enter

9) Change jtag to data

10) Power circle both pc's

11) Enjoy wrecking nerds undetected