🟢Makima DMA

Marathon (DMA) Radar PC — Setup & Loading Guide

Loader Download >>> 2nd PC Register an account here to download loader: https://makima.cx/

Steps

Step 1 — Open the Loader Open the loader application on your Radar PC (cheat PC).

Step 2 — Select Marathon Select Marathon from the list inside the loader and wait for it to fully load.

Step 3 — Enable Aimbot Once Marathon has loaded, navigate to the Aimbot section and toggle the switch on.

Note: You will need to set up aimbot separately for monsters and players if you want it active for both.

Step 4 — Configure Aimbot Targets In the Aimbot settings, configure it for monsters, players, or both depending on your preference. Make sure each target type is individually set up before moving on.

Step 5 — Configure Aim Keys To set your aim keys, hover over the aim switch and press the cog icon to open the key binding settings. Set your desired aim key or keys, then make sure you press the + (plus) sign to move the key over to the right side to confirm it is active.

Step 6 — Go to Settings & Select Your Aim Device Head into Settings and select the aim device you are using. Make sure your device is one of the following supported options:

• KMBoxNet

• BPro

• MAKCU

Step 7 — Initialize Your Aim Device Confirm that your aim device successfully initializes. You should see a confirmation that it is ready to use.

---

Potential Issues & Fixes

🔴 Keyboard failed to initialize Please open a support ticket. We will send you a test EXE to help identify the problem and handle it accordingly.

🔴 Cheat failed to initialize Make sure your DMA is properly connected. Run a speed test to verify the connection is working.

🔴 Cheat fails to load entirely Please open a support ticket and we will respond as soon as possible. Include your Windows version (winver) in the ticket.