🟢BBC Arc Raiders
Always start the game first on the host PC.
Run the DMA software as administrator from the extracted folder.
Use Mode 1 for initialization unless issues occur.
Transparent mode = no box required, higher security.
Full version = hardware-based, requires port configuration.
Adjust FPS to 120 if you experience lag.
✅ Summary
Verify all port parameters are entered correctly.
Double-check your IPv4 address.
Ensure the DMA channel isn’t already being used by another process.
If the above doesn’t work, switch to another mapping mode in the interface.
If you see a “connection failed” message after clicking Connect:
🚫 Connection Failures
On laptops, check that the dedicated GPU is in use (not integrated).
On desktops, use a speed measurement tool — around 6000 is normal.
If speed is fine, go to game settings and set the FPS limit to 120 (instead of Unlimited).
🐢 Delayed ESP Drawing or Lag
⚙️ Troubleshooting & Common Issues
Initialize / Inject
INS
Can also click “Click me to initialize.”
Hide Software Menu
HOME
Customizable hotkey.
Exit Program
(X in the top-right corner)
Standard close button.
Toggle Battlefield Overview
F1
Customizable.
Show Enemy Equipment
F
Customizable.
Battle Mode Toggle
~ (Tilde key)
Customizable.
⌨️ Shortcut Keys (Default)
💡 Tip: If Mode 1 fails or gives an error, try switching to another mapping mode.
Fill in the required port parameters and any other configuration fields.
Once complete, click “Inject Mapping.”
Full Version Users
Go to Settings → Map Injection → “Map Injection.”
The DMA box power can be safely unplugged (transparent users don’t require the box).
Offers higher security since it operates without hardware injection.
Transparent-Only Users
🔧 Transparent vs. Full Version Setup
Launch the game normally on the host PC and load completely into the match or main menu.
On the secondary PC, extract the auxiliary software using folder extraction (don’t run directly from a ZIP).
Inside the extracted folder, right-click the program and select “Run as Administrator.”
If the server connection fails, wait about 1 minute and try again. Repeat a few times if necessary.
Enter your password and click Login. Wait 10–20 seconds until the settings interface appears.
Choose a mapping initialization mode (Mode 1 by default). Click Inject / Initialize Mapping.
Wait another 10–20 seconds. The software interface will reappear and display “Initialization Success” in the bottom-right corner — you’re ready to play!
On first launch, the best perspective area will be automatically selected.
Any changes you make will auto-save in real time (no save button needed).
🚀 Opening & Initialization Steps
Make sure the game on the host PC (console) is running in Borderless (Windowed Fullscreen) mode.
Confirm that all Microsoft Runtime and DirectX components are installed on the secondary (DMA) PC.
If using a laptop as the secondary machine, ensure it defaults to the dedicated GPU instead of the integrated GPU — using integrated graphics will significantly affect frame rate.
🧰 Preparation Before Use
BBC-ARC DMA – Setup & Quick Start Guide
Last updated