# Blurred Rust DMA

## Download Loader on 2nd Pc

[https://blurred.gg/loader](https://blurred.gg/loader)



### ✅ Initial Setup (Cheat PC)

1. Install C++ Redistributables\
   ➤ Download and install from: [Microsoft C++ Redists](https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist)
2. Install WebView2\
   ➤ Usually pre-installed on Windows 10/11. If needed: [WebView2 Download](https://developer.microsoft.com/en-us/microsoft-edge/webview2/)
3. Install DMA Driver\
   ➤ Run the driver installer as Administrator\
   ➤ Download driver [here](https://mega.nz/file/Od1T1aqS#vF9lDQ0hGzs-WqhbKm5foclt233TEfOtAqXURKKQL2E)\
   ➤ Restart your cheat PC after installation.
4. Connect the DMA Card\
   ➤ Plug the cable into a USB 3.0+ port on your cheat PC\
   ➤ Ensure the DMA card is connected via the correct data port
5. Launch Blurred\
   ➤ If you get “Failed to initialize DMA”, restart both PCs.\
   ➤ Still having issues? Refer to the Troubleshooting section below.

### Generate MMAP

Creating an MMap file can fix many issues like slow/stuck progress or searching speeds, DMA connectivity issues, some players or items not showing up on ESP/Aimbot, etc

#### 🧰 Step 1: Use RamMap on Your Gaming PC

1. [Download & Extract RamMap](https://blurred.gg/guides/mmap)\
   ➤ Visit the official site and download RamMap\
   ➤ Use incognito mode or clear browser history after downloading
2. Run RamMap64.exe as Administrator\
   ➤ Make sure you're running it on your main (gaming) PC, not your cheat PC
3. Save the Memory Snapshot\
   ➤ In RamMap, go to the top-left menu → File → Save\
   ➤ Save the .RMP file somewhere easy to access (like your desktop)\


#### 📤 Step 2: Transfer & Convert the File

4. Upload the .RMP file to the MMap Tool Website\
   ➤ The tool runs locally and doesn't upload your file online\
   ➤ It’s safe and contains no personal info
5. Click “Copy” or “Download”\
   ➤ Transfer the MMap result to your cheat PC (via USB, Discord, etc.)\


#### 📂 Step 3: Set Up the MMap File for Blurred

6. Create a Folder for Blurred (Cheat PC)\
   ➤ If you haven’t already, make a folder on your desktop for the Blurred loader
7. Add the MMap File\
   ➤ Create a new text file in that folder and name it exactly:\
   mmap.txt _(all lowercase)_\
   ➤ Paste the MMap contents from the tool into this file\


#### ▶️ Final Step: Launch Blurred

8. Open Blurred\
   ➤ If everything is correct, the CMD will show "Loading MMap..."\
   ➤ If not, double-check the file name and that it’s in the correct folder

Your MMap setup is now complete.



### Troubleshooting:



1. Failed to connect to memory acquisition device:

<figure><img src="https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2FF4xKblHzl7UtbcQtvyGS%2Fdma1.webp?alt=media&#x26;token=3281e3ab-c90b-42ca-a6e8-d1f04593f29b" alt=""><figcaption></figcaption></figure>

➤ Shut down both PCs completely\
➤ Unplug/replug the DMA card and USB cable\
➤ Power both PCs back on



2. Unable to locate valid DTB #x:

<figure><img src="https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2FRAGGGolWZcQ5thisucEQ%2Fdma2.png?alt=media&#x26;token=98ecd6e6-757b-46b2-b1dc-0f59d9a6075d" alt=""><figcaption></figcaption></figure>

➤ Create the MMap file properly\
➤ Disable virtualization in BIOS:\
&#x20;             Intel: Disable VT-x / VT-d\
        AMD: Disable SVM / IOMMU\
➤ Try a full restart of both PCs\
➤ If issue started after flashing firmware, contact your firmware supplier



3. Failed to find base address:

<figure><img src="https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2FlLV8wwBQWhqvvlmLUKZL%2Fdma3.webp?alt=media&#x26;token=3dd52784-c479-426c-9e90-b2c481dd990d" alt=""><figcaption></figcaption></figure>

➤ Restart both PCs\
➤ Double-check your MMap file\
➤ On both PCs, open Command Prompt as Admin and run:\
  _sfc /scannow_\
  _DISM /Online /Cleanup-Image /RestoreHealth_\
➤ Restart after both commands complete



4. Other USB Devices disconnnecting/reconnecting:

If you get this issue where a peripheral (headset, mouse, keyboard etc) are cutting in and out on your main gaming PC;

➤ Try different PCIe slots for the DMA card\
➤ Move affected USB devices to other USB ports on the motherboard



### KMBOX B+ Set Up:

#### 🔌 Hardware Setup -

1. Connect the Cables\
   ➤ Plug a cable from the top-left port of the KMBox into your cheat PC\
   ➤ Plug another cable from the bottom-left port into your gaming PC
2. Install the KMBox Driver _(on the Radar/cheat PC)_\
   ➤ If not already installed, download and [install the KMBox driver](https://mega.nz/file/SJdQXapT#KbMyeGqJm73M6wa3rKWb-4x5vlpWBxy1kV745ja9xcs)\
   ➤ Restart your cheat PC after installation

#### 🖥 Software & Verification -

3. Launch Blurred\
   ➤ Look in the command window (CMD)\
   ➤ If you see: **"Successfully connected to your KMBox B+"** → You're good to go\
   ➤ If not:\
   ➤ Recheck cable connections\
   ➤ Restart both PCs\
   ➤ Still not working? Open ticket on **Discord** for support\

4. Test KMBOX Functionality\
   ➤ Go to the "Debug" tab in Blurred   \
   ➤ Click "Test KMBox Move" and "Test KMBox Click"   \
   ➤ If nothing happens on your gaming PC:   \
   ➤ Fully unplug/replug the KMBox   \
   ➤ Click "Restart KMBox" in Blurred   \
   ➤ Still not working? Open a ticket on Discord   \
   ➤ If the tests do work, your KMBox is fully set up and ready to use



### KMBOX NET Set Up:

#### 🔌 Hardware Setup

1. Connect the KMBox Net\
   ➤ Plug the top-left port of the KMBox Net into your cheat PC\
   ➤ Plug the bottom-left port into your gaming PC\


#### 🖥 Driver Installation (Cheat PC)

2. Download & Extract Driver\
   ➤ [Download](https://mega.nz/file/zIdiEQhA#AWeKBv6R7ZdXt0y7t2xHN69jULoyFbAXhu16N5vXSso) the KMBox Net driver and extract the folder\

3. Install the Driver\
   ➤ Open WCHUSBNIC.EXE from the extracted folder\
   ➤ Click the big “INSTALL” button\
   ➤ If installation fails, contact support on Discord\

4. Restart your Cheat PC



#### 🌐 Network Setup (Cheat PC)

5. Go to:\
   Control Panel → Network and Internet → Network and Sharing Center → Change adapter settings\

6. Find the KMBox Net Network Adapter\
   \
   ![](https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2F7tfnxliCGz3B7FRUdgpS%2Fimage.png?alt=media\&token=18fd61c0-a7f0-4f8b-b857-138e5076d526)\
   \
   ➤ Right-click → Properties   \
   ➤ If unsure which adapter it is, unplug/replug the KMBox and watch which one appears/disappears\

7. Network Settings\
   ➤ Disable: _Internet Protocol Version 6 (TCP/IPv6)_\
   ➤ Enable & Configure: _Internet Protocol Version 4 (TCP/IPv4)_\
   \
   ![](https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2Fl8YEm8Sor7UuQSrfGuYv%2Fimage.png?alt=media\&token=fab353f7-5310-4a0c-883e-72030ac5fbc2)\
   \
   ➤ Click Properties and set it the following:\
   \
   ![](https://367862104-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdC2T8C1BqGAYE0ELuJZo%2Fuploads%2F0d98SyWWUMnhiqGP4JFN%2Fimage.png?alt=media\&token=99a25319-829c-4530-a8df-f872cf79ff3a)\
   \


#### 🧪 Blurred Setup & Testing

5. Launch Blurred\
   ➤ Go to the “Debug” tab   \
   ➤ Enter the IP and Port shown on your KMBox Net screen   \
   ➤ Click “Connect”\

6. Test the connection\
   ➤ Use “Test KMBox Move” and “Test KMBox Click”   \
   ➤ If your mouse doesn’t move/click on the gaming PC:   \
   ➤ Restart both PCs and try again



Your KMBox Net is now ready to use. If you need assistance at any step, our support team is available via Discord.







\






